Digital Pool Water Testing in Melbourne
Stop relying on faded paper test strips or inaccurate visual color blocks. Our mobile technicians bring advanced digital photometers directly to your poolside to measure 9 critical water parameters with lab accuracy and deliver a clear written dosing plan.
- Digital optical photometer testing at your poolside
- Tests 9 critical chemical parameters in minutes
- Identifies hidden chlorine lock (CYA), phosphates & pH drift
- Clear digital report with exact chemical dosing instructions
The hidden chemical imbalances test strips miss
A pool can look crystal clear while silently corroding your heater, destroying chlorinator plates, or harbouring chlorine lock.
Chlorine Lock (CYA Overdose)
High cyanuric acid (>80 ppm) from tablet use locks free chlorine molecules, rendering them incapable of killing algae.
pH & Alkalinity Rebound
Low total alkalinity causes severe pH bounce: adding a splash of acid crashes the water into an eye-stinging, corrosive state.
High Dissolved Phosphates
Phosphates from fertiliser and rainwater act as food for algae. Even 500 ppb can cause sudden green pool explosions.
Corrosive vs Scaling LSI
Improper Langelier Saturation Index (LSI) dissolves calcium from pool plaster or coats chlorinator cells in thick white scale.
9 key parameters tested with laboratory precision
We test every variable that affects swimmer safety, water clarity, and pool equipment longevity.
Free Available Chlorine (FAC)
Active sanitiser available to immediately kill bacteria and algae (Target: 2.0 – 4.0 ppm).
Total & Combined Chlorine
Detects irritating chloramines causing red eyes and strong chlorine smell (Target: < 0.2 ppm).
pH Level
Measures acidity / alkalinity to ensure sanitiser efficiency and swimmer comfort (Target: 7.2 – 7.6).
Total Alkalinity (TA)
The buffering capacity that prevents rapid, damaging swings in pool pH (Target: 80 – 120 ppm).
Calcium Hardness
Prevents water from leaching calcium from plaster or depositing crusty scale (Target: 200 – 400 ppm).
Cyanuric Acid (CYA / Stabiliser)
Protects chlorine from UV degradation while preventing chlorine lock (Target: 30 – 50 ppm).
Orthophosphate Level
Measures algae food in parts per billion to stop algae before it starts (Target: < 100 ppb).
Salt / TDS Level
Verifies salinity meets manufacturer specs for saltwater chlorinator cells (Target: 3,000 – 5,500 ppm).
Our 4-step on-site testing protocol
Quick, clean, and delivered directly to your phone or inbox:
Elbow-Deep Water Sampling
We take water samples 45cm below the surface, away from return jets, ensuring a representative sample.
Optical Photometer Analysis
Light-transmission digital photometers analyse reagent color reactions, eliminating human visual error.
Digital Diagnostic Calculation
Our software inputs your pool volume, surface type, and temperature to calculate exact chemical additions.
Clear Dosing Plan & Report
You receive a comprehensive digital report detailing your results and step-by-step chemical additions.
Choose a Plan. We Handle the Rest.
No hidden fees or lock-in contracts; chemicals are billed separately at cost.
- Water testing – Accurate analysis of pH, chlorine & alkalinity.
- Balancing – Chemical adjustments for healthy pool water.
- Pool cleaning – Surface skimming, wall brushing & baskets.
- Equipment inspection – Checking pumps, seals & minor on-spot fixes.
- Heating maintenance – Temperature control & efficiency checks.
- Filter cleaning – Regular backwash & cartridge maintenance.
- Algae prevention – Phosphate control & sanitiser dosing.
- Priority support – 48-hour response for mobile pool service.
- Water testing – Accurate analysis of pH, chlorine & alkalinity.
- Balancing – Chemical adjustments for healthy pool water.
- Pool cleaning – Wall brushing, skimming & floor vacuuming.
- Equipment repair check – Wear & tear diagnosis and repairs.
- Heating diagnosis – Proper performance & energy efficiency.
- Filter deep cleaning – Deep cleaning, backwash & cartridge care.
- Algae prevention – Phosphate removal & mineral balancing.
- Priority support – 48-hour emergency response Melbourne.
- Water testing – Comprehensive analysis & water diagnostics.
- Balancing – Complete chemical balancing & mineral care.
- Melbourne pool clean – Full vacuum, brush & complete sanitisation.
- Equipment inspection – Pumps, chlorinators, pipes & spot repair.
- Heating maintenance – Temperature regulation & heat pump care.
- Filter deep cleaning – Full media backwash & cartridge replacement.
- Algae prevention – Total preventative dosing & phosphate cure.
- Priority support – Priority on-site emergency call-out response.
Servicing all Melbourne suburbs
Our mobile technicians cover every region across greater Melbourne. Choose your area:
Frequently asked questions
Everything you need to know about our Digital Pool Water Testing Melbourne service across Melbourne.
Send us a photo of your pool or speak directly with our mobile technician team.
Call 0399687627Why are test strips inaccurate compared to digital photometers?
Test strips degrade rapidly when exposed to humidity, air, and sunlight. Furthermore, matching faded reagent pads against color squares on a bottle is subjective and often inaccurate by up to 50%, leading to expensive over-dosing of pool chemicals.
How often should I have my Melbourne pool water professionally tested?
During summer, water should be tested weekly at home and professionally tested once every 4 to 6 weeks. In winter, a professional test every 2 months ensures your pool does not suffer silent calcium or acid corrosion.
What is “Chlorine Lock” and can testing detect it?
Yes. Chlorine lock occurs when cyanuric acid (stabiliser) climbs above 100 ppm, usually from years of using stabilised chlorine tablets or granular shock. The stabiliser binds to free chlorine so tightly that it can no longer sanitise. Our digital test measures exact CYA levels.
Do you bring the balancing chemicals with you?
Yes. All our service vehicles are fully stocked with commercial liquid chlorine, dry acid, buffer, calcium chloride, stabiliser, salt, and phosphate removers.
Can you test saltwater pools and mineral pools?
Yes. We test standard chlorine pools, saltwater pools (measuring exact NaCl ppm), and mineral/magnesium pools (measuring magnesium chloride levels).
Crystal clear water, handled by professionals.
Get a fixed quote for your pool – reach our local Melbourne team whichever way suits you best.