Mon - Sun: 6:00 AM – 8:00 PM
Restore circulation · Sand & cartridge filter care

Pool Filter Cleaning & Sand Changes in Melbourne

Your filter is the heart of your pool’s circulation system. When filter sand becomes calcified or cartridge pleats become choked with sunscreen and oils, water circulation drops, pressure spikes, and water turns cloudy. We provide complete sand changes, glass media upgrades, and deep chemical cartridge cleanings.

  • Filter sand removal & replacement (quartz sand & glass media)
  • Cartridge filter chemical degreasing & pleat pressure cleaning
  • Fixes high filter pressure, weak return flow & cloudy water
  • Full multi-point valve, lateral & pressure gauge inspection
Filtration Experts All filter makes & models
Skilled Technicians Safe media removal
Fully Insured Equipment protection
Flow Testing Pressure & flow certified
Lateral Inspection Internal laterals verified
Signs of filter failure

How to tell when your pool filter needs servicing

Filtration media wears out over time. If you notice any of these warning signs, your filter requires professional attention:

High Operating Pressure

Filter pressure gauge reads 10+ psi above clean baseline, and backwashing only drops pressure for a few hours.

Persistent Cloudy Water

Water looks dull or hazy despite proper chlorine and pH, because worn media can no longer trap fine particles.

Weak Flow at Return Jets

Water returning to the pool feels sluggish, reducing circulation and allowing dead spots where algae can take hold.

Old Filter Media (5+ Years)

Filter sand grains have rounded smooth, channelled, or calcified into hard rock-like chunks that let debris pass through.

Full filter service

What is included in our filter maintenance services

We service all major brands: AstralPool, Zodiac, Davey, Hayward, Pentair, and Waterco.

Complete Media Extraction

Safely vacuuming out old, contaminated sand or glass media without damaging bottom lateral fingers.

Internal Lateral Inspection

Inspecting internal laterals, standpipes, and diffusers for cracks that cause sand to blow into the pool.

New Premium Media Installation

Installing fresh premium silica sand or high-efficiency recycled glass media to manufacturer specifications.

Multiport Valve Servicing

Checking and lubricating multiport valve spider gaskets and O-rings to stop waste line bypass leaks.

Cartridge Chemical Degreasing

Soaking cartridge elements in specialised enzymatic degreasers to dissolve body oils, lotions, and scale.

Pressure Gauge Calibration

Verifying pressure gauge accuracy and testing system flow rate before signing off the job.

Structured service

How our sand change service works in 4 steps

Clean, professional execution with zero mess left in your yard:

Drain & Depressurise

We isolate the filter, release tank pressure, drain the water, and remove the multiport valve head.

Media Extraction & Vacuum

Old calcified sand is vacuumed out cleanly and bagged for disposal, keeping your equipment pad spotless.

Lateral Inspection & Cushion Water

We inspect bottom laterals, replace damaged parts, and fill the tank halfway with water to cushion new media.

Media Loading & Backwash Rinse

We load coarse and fine media, re-assemble the valve, and run an extended backwash and rinse cycle.

Simple Maintenance Plans

Choose a Plan. We Handle the Rest.

No hidden fees or lock-in contracts; chemicals are billed separately at cost.

Basic Plan
$85
/ Weekly
  • Water testing – Accurate analysis of pH, chlorine & alkalinity.
  • Balancing – Chemical adjustments for healthy pool water.
  • Pool cleaning – Surface skimming, wall brushing & baskets.
  • Equipment inspection – Checking pumps, seals & minor on-spot fixes.
  • Heating maintenance – Temperature control & efficiency checks.
  • Filter cleaning – Regular backwash & cartridge maintenance.
  • Algae prevention – Phosphate control & sanitiser dosing.
  • Priority support – 48-hour response for mobile pool service.
Get Started
Premium Plan
$105
/ Monthly
  • Water testing – Comprehensive analysis & water diagnostics.
  • Balancing – Complete chemical balancing & mineral care.
  • Melbourne pool clean – Full vacuum, brush & complete sanitisation.
  • Equipment inspection – Pumps, chlorinators, pipes & spot repair.
  • Heating maintenance – Temperature regulation & heat pump care.
  • Filter deep cleaning – Full media backwash & cartridge replacement.
  • Algae prevention – Total preventative dosing & phosphate cure.
  • Priority support – Priority on-site emergency call-out response.
Get Started
Where we service

Servicing all Melbourne suburbs

Our mobile technicians cover every region across greater Melbourne. Choose your area:

Got questions?

Frequently asked questions

Everything you need to know about our Pool Filter Cleaning & Sand Change Melbourne service across Melbourne.

Need advice right now?

Send us a photo of your pool or speak directly with our mobile technician team.

Call 0399687627
How often should pool filter sand be replaced?

In Melbourne residential pools, standard silica sand should be replaced every 4 to 6 years. Over time, constant water friction rounds the sharp edges of sand grains, causing them to lose their ability to trap fine debris. Upgrading to glass media extends media lifespan to 10–12 years.

What is the advantage of glass media over traditional sand?

Recycled glass media filters particles down to approximately 3 microns (compared to 20–30 microns for sand), resulting in noticeably clearer water. Glass is also negatively charged, resisting biological clumping and requiring up to 25% less water during backwash cycles.

Why is there sand on the bottom of my pool?

If sand appears on your pool floor under the return jets, one or more lateral fingers inside the bottom of your filter tank have cracked, or the multiport valve spider gasket has failed. We inspect and replace damaged laterals during our sand change service.

Can I clean my cartridge filter with a garden hose alone?

Hosing removes loose surface debris, but does not dissolve body oils, suntan lotions, and calcium scale embedded in the microscopic polyester pores. Professional chemical soaking in an enzymatic degreaser restores full filtration flow.

Do you take the old filter sand away with you?

Yes. We extract old heavy sand directly into heavy-duty disposal bags and remove it from your property, leaving your equipment pad clean and tidy.

Ready when you are

Crystal clear water, handled by professionals.

Get a fixed quote for your pool – reach our local Melbourne team whichever way suits you best.

info@greenpoolcleaning.au · Mon - Sun: 6:00 AM – 8:00 PM · Servicing all of Melbourne
Grab 20% off now