Mon - Sun: 6:00 AM – 8:00 PM
Water Hygiene Testing · Sanitiser & Bromine Balancing · Deep Biofilm Purge

Spa Pool Maintenance in Melbourne

Heated spa water harbours bacteria and biofilm fast without precise care. Our certified Melbourne technicians test, balance, and deep-clean spas and swim spas so you can soak with complete peace of mind.

  • Precise digital testing for spas & swim spas
  • Biofilm pipe flushing and deep jet descaling
  • Cartridge filter degreasing & soak cleaning
  • Chlorine, bromine & non-chlorine oxidiser balancing
Sanitiser SpecialistsChlorine, bromine, peroxide
Biofilm Purge ExpertsDeep flush of hidden pipes
Swim Spa CapableHigh-volume current spas
Digital Hygiene ReportDelivered after every visit
Foam-Free Clarity100% water quality guarantee
Warm water challenges

4 Common Spa Problems That Ruin Your Soak

At 36°C to 38°C, bacteria multiply up to 100 times faster than in a regular swimming pool. Routine care prevents water issues.

Cloudy & Foamy Water

Body oils, cosmetics, and detergents accumulate rapidly in small water volumes, causing cloudy water and persistent foam.

Strong Chemical Odour

Spent chloramines trapped under closed spa covers cause eye burning, skin irritation, and unpleasant chemical smells.

Hidden Pipework Biofilm

Bacterial slime adheres to the interior walls of unseen circulation pipes and jets, releasing bacteria into the water.

Glazed Cartridge Filters

Body fats and suntan oils clog cartridge pleats, choking circulation and causing heaters to trip off on low-flow errors.

Is your spa water smelling sour or looking green? Book a rapid green recovery and system flush →

Complete service scope

Professional Spa & Swim Spa Care Protocol

Every component from acrylic shell to circulation pumps inspected and balanced on every visit.

Digital Chemical TestingTesting free sanitiser, total alkalinity, pH, and calcium hardness.
Cartridge Filter DegreasingHigh-pressure rinse and chemical degreaser soak of filter pleats.
Sanitiser BalancingPrecise dosing of bromine, chlorine, or non-chlorine shock oxidisers.
Pipe Biofilm FlushSpecialist pipe flush to purge hidden bacteria from internal plumbing.
Waterline & Shell CleanNon-abrasive cleaning along the acrylic waterline and jet bezels.
Cover ConditioningCleaning vinyl covers and applying UV protectant against Melbourne sun.
Heater & Flow CheckVerifying heating elements, air blowers, and diverter valves.
Digital Hygiene ReportComplete chemical levels, salt readings, and cell status emailed to you.
Service frequency options

Tailored Plans for Domestic Spas & Swim Spas

Select the routine that matches how frequently you and your family soak.

Active Users

Fortnightly Spa Care

Recommended for regularly used spas and high-use swim spas.

  • Fortnightly chemical balance & filter swap
  • Acrylic waterline wipe & vacuum
  • Always swim-ready and crystal clear
Most popular

Monthly Spa Maintenance

Ideal routine for weekend spa owners and light domestic bathers.

  • Thorough water testing & chemical balancing
  • Deep cartridge filter degreasing
  • Equipment inspection and cover conditioning
Seasonal Reset

Dump, Flush & Refill

Essential quarterly reset to remove accumulated total dissolved solids (TDS).

  • Internal pipework biofilm decontamination flush
  • Complete drain & acrylic shell polish
  • Fresh refill & baseline chemical balance
Simple Maintenance Plans

Choose a Plan. We Handle the Rest.

Fixed monthly pricing with zero lock-in contracts. Spa chemicals billed at cost.

Basic Plan
$85
/ Weekly
  • Water testing – Accurate analysis of pH, chlorine & alkalinity.
  • Balancing – Chemical adjustments for healthy pool water.
  • Pool cleaning – Surface skimming, wall brushing & baskets.
  • Equipment inspection – Checking pumps, seals & minor on-spot fixes.
  • Heating maintenance – Temperature control & efficiency checks.
  • Filter cleaning – Regular backwash & cartridge maintenance.
  • Algae prevention – Phosphate control & sanitiser dosing.
  • Priority support – 48-hour response for mobile pool service.
Get Started
Premium Plan
$105
/ Monthly
  • Water testing – Comprehensive analysis & water diagnostics.
  • Balancing – Complete chemical balancing & mineral care.
  • Melbourne pool clean – Full vacuum, brush & complete sanitisation.
  • Equipment inspection – Pumps, chlorinators, pipes & spot repair.
  • Heating maintenance – Temperature regulation & heat pump care.
  • Filter deep cleaning – Full media backwash & cartridge replacement.
  • Algae prevention – Total preventative dosing & phosphate cure.
  • Priority support – Priority on-site emergency call-out response.
Get Started
What a visit looks like

Your spa pool handled in five steps

Complete hygiene and chemical balancing completed efficiently every time.

1. Digital Test

Sanitiser, pH, alkalinity, and calcium levels tested.

2. Clean Filters

Cartridge filters removed, degreased, and pressure rinsed.

3. Shell & Waterline

Waterline scrubbed, footwell vacuumed, surface skimmed.

4. Chemical Balance

Non-chlorine shock oxidisers and buffers dosed.

5. Digital Report

Detailed digital report sent with status and tips.

Melbourne seasonal guide

Year-Round Spa Pool Care

How to get the most relaxation out of your spa in every Melbourne season.

Spring Refresh

Full dump, pipe biofilm flush, and refill with fresh water ready for sunny warm days.

Spring checklist →

Summer Swim Mode

Lower temperature setpoint to 28°C–32°C for refreshing plunge use and swim spa training.

Summer spa tips →

Autumn Check

Inspect cover seals and test heating elements to maximize efficiency before cold nights arrive.

Heater checks →

Winter Peak Soak

Weekly sanitiser monitoring to maintain crystal clarity during high-frequency winter use.

Winter soak guide →
Where we service spas

Spa Pool Maintenance Across Melbourne

Certified mobile spa technicians servicing all Melbourne metropolitan suburbs:

FAQs

Spa Maintenance Questions, Answered

What Melbourne spa and swim spa owners ask our team.

Spa water foamy or smelling sour?

Avoid using cloudy spas. Reach out to our technicians for same-day assistance.

Call 0399687627
How often should spa pool water be emptied and refilled?

In domestic spas, water should be emptied and replaced every 3 to 4 months. Because spas have a small volume of water that is heated to high temperatures, dissolved solids, body oils, and minerals build up until chemicals can no longer work effectively. A complete drain, pipe purge, and refill restores crystal water.

Why does my spa pool water get cloudy and foamy?

Foam and cloudiness are caused by body oils, lotions, cosmetics, and residual laundry detergent from swimwear accumulating in the water. We use specialized non-chlorine shock treatments, filter degreasers, and natural enzymes to break down organic waste and eliminate foam without harsh smells.

Do you service swim spas in Melbourne?

Yes. Swim spas require specialized care because they combine the high volume of a swimming pool with the high temperatures and powerful swim currents of a spa. We test, balance, and maintain swim spas across all Melbourne suburbs.

Is chlorine or bromine better for spas?

Bromine is often preferred for heated spas because it remains stable and effective at high water temperatures (above 35°C), whereas chlorine evaporates quickly. Bromine also produces far less odor and is gentler on sensitive skin. We evaluate your usage to recommend the best option.

What maintenance do spa pool covers need?

Spa covers absorb moisture and collect dirt. If left untreated, the vinyl dries out, cracks under Melbourne’s intense sun, and allows heat and chemicals to escape. We clean and apply UV protectant conditioners to extend the life of your cover.

See all FAQs →

Ready when you are

Crystal clear water, handled by professionals.

Get a fixed quote for your pool – reach our local Melbourne team whichever way suits you best.

info@greenpoolcleaning.au · Mon - Sun: 6:00 AM – 8:00 PM · Servicing all of Melbourne
Grab 20% off now