Pool Acid Wash in Melbourne
When algae stains, calcium scale, or mineral discoloration are baked into your concrete or pebblecrete pool surface, regular brushing and shock won’t shift them. Our controlled pool acid wash strips away the thin calcified layer, revealing a fresh, bright surface underneath.
- Controlled hydrochloric acid & water formulation
- Removes stubborn calcium scale, rust & mineral stains
- Restores dull, discoloured concrete & pebblecrete pools
- Safe, licensed & insured technician execution
The common surface problems an acid wash solves
Over years of use, concrete, plaster, and pebblecrete pools accumulate stubborn mineral and chemical deposits.
Calcium Scale & Hazing
High calcium hardness in pool water causes white, crusty calcium scale to deposit across waterline tiles and wall plaster.
Metal & Rust Staining
Copper from low-grade algaecides or iron from garden fertilisers creates dark blue-green, brown, or rusty stains in the plaster matrix.
Embedded Algae Roots
Severe black algae infestations leave stubborn root pigmentation etched deep into the plaster that regular chlorine cannot touch.
Dulled & Discoloured Plaster
Age and UV exposure dull the original vibrant colour of plaster and pebble surfaces, making the pool look aged and dirty.
What is included in our professional acid wash
Acid washing is a precision chemical process that requires specialist protective gear, exact ratios, and careful timing.
Controlled Pool Draining
Safely pumping water from the pool using high-flow submersible trash pumps while monitoring hydrostatic valves.
Hydrostatic Valve Inspection
Inspecting and freeing hydrostatic pressure relief valves in the main drain to prevent ground pressure damage.
Custom Acid & Surfactant Mix
Mixing a precise ratio of hydrochloric acid, water, and specialized thickening surfactants for uniform surface contact.
Systematic Wall & Floor Wash
Applying the solution section by section with acid-resistant brushes, monitoring the etch rate down to the second.
Fresh Water Neutralisation
Rinsing immediately and neutralising all acid wash runoff with soda ash before pumping out safely.
Refill Balancing Plan
Providing exact water balancing chemicals and instructions to protect the newly exposed plaster upon refilling.
Our 4-step pool acid wash process
Precision execution to restore your pool finish without etching too deep:
Drainage & Relief Valve Check
We safely pump out the pool water and open the hydrostatic relief plug to equalise groundwater pressure.
Debris Scraping & Surface Prep
We pressure rinse the shell, scrape loose calcium crusts, and prepare the plaster for chemical application.
Acid Wash & Gentle Agitation
Our technicians apply the acid solution in controlled sections, brush gently, and immediately rinse to remove the micro-layer of stained plaster.
Neutralisation & Refill Supervision
We neutralise the bowl wastewater to pH 7.0, pump it to the sewer safely, and begin refilling with fresh water.
Choose a Plan. We Handle the Rest.
No hidden fees or lock-in contracts; chemicals are billed separately at cost.
- Water testing – Accurate analysis of pH, chlorine & alkalinity.
- Balancing – Chemical adjustments for healthy pool water.
- Pool cleaning – Surface skimming, wall brushing & baskets.
- Equipment inspection – Checking pumps, seals & minor on-spot fixes.
- Heating maintenance – Temperature control & efficiency checks.
- Filter cleaning – Regular backwash & cartridge maintenance.
- Algae prevention – Phosphate control & sanitiser dosing.
- Priority support – 48-hour response for mobile pool service.
- Water testing – Accurate analysis of pH, chlorine & alkalinity.
- Balancing – Chemical adjustments for healthy pool water.
- Pool cleaning – Wall brushing, skimming & floor vacuuming.
- Equipment repair check – Wear & tear diagnosis and repairs.
- Heating diagnosis – Proper performance & energy efficiency.
- Filter deep cleaning – Deep cleaning, backwash & cartridge care.
- Algae prevention – Phosphate removal & mineral balancing.
- Priority support – 48-hour emergency response Melbourne.
- Water testing – Comprehensive analysis & water diagnostics.
- Balancing – Complete chemical balancing & mineral care.
- Melbourne pool clean – Full vacuum, brush & complete sanitisation.
- Equipment inspection – Pumps, chlorinators, pipes & spot repair.
- Heating maintenance – Temperature regulation & heat pump care.
- Filter deep cleaning – Full media backwash & cartridge replacement.
- Algae prevention – Total preventative dosing & phosphate cure.
- Priority support – Priority on-site emergency call-out response.
Servicing all Melbourne suburbs
Our mobile technicians cover every region across greater Melbourne. Choose your area:
Frequently asked questions
Everything you need to know about our Pool Acid Wash Melbourne service across Melbourne.
Send us a photo of your pool or speak directly with our mobile technician team.
Call 0399687627Can you acid wash a fiberglass pool or vinyl liner?
No. Acid washing is strictly for concrete, plaster, and pebblecrete pools. Hydrochloric acid will melt or permanently bleach vinyl liners and cause severe blistering on fiberglass gelcoats. For fiberglass pools, we use specialised non-draining stain lifting chemicals.
Does an acid wash damage the plaster?
When performed by experienced professionals, no. An acid wash removes only a paper-thin microscopic layer (under 1mm) of calcified plaster. Pools can typically be acid washed 3 to 4 times over their lifespan without compromising plaster thickness.
How long does an acid wash take?
The draining, acid washing, and neutralising process takes 1 to 2 days depending on pool size and weather conditions. Once complete, refilling begins immediately to protect the empty shell from sun exposure.
Is it safe to drain my concrete pool?
We check ground saturation and always unseat the hydrostatic pressure relief plug in the main drain before emptying the pool. This allows any underground water to flow into the pool rather than pushing the pool out of the ground.
What chemicals are needed after the pool refills?
Fresh tap water in Melbourne has low calcium hardness and low total alkalinity, which makes it aggressive toward fresh plaster. We dose calcium chloride, buffer, and stabiliser immediately after refilling to cure and protect the surface.
Crystal clear water, handled by professionals.
Get a fixed quote for your pool – reach our local Melbourne team whichever way suits you best.